进口横河川仪EJX110A压力变送器横河压力变送器差压变送器

进口横河川仪EJX110A压力变送器横河压力变送器The high performance differential pressure transmitter EJX110A features single crystal silicon resonant sensor and is suitable to measure liquid, gas, or steam flow as well as liquid level, density and pressure. EJX110A outputs a 4 to 20 mA DC signal corresponding to the measured differential pressure. Its highly accurate and stable sensor can also measure the static pressure which can be shown on the integral indicator or remotely monitored via BRAIN or HART communications. Other key features include quick response, remote set-up using communications, diagnostics and optional status output for pressure high/low alarm. The multi-sensing technology provides the advanced diagnostic function to detect such abnormalities as an impulse line blockage or heat trace breakage. FOUNDATION Fieldbus and PROFIBUS PA protocol types are also available. All EJX series models in their standard configuration, with the exception of the Fieldbus and PROFIBUS types, are certified by TÜV as complying with SIL 2 for safety requirement.
 STANDARD SPECIFICATIONS
Refer to GS 01C25T02-01EN for Fieldbus communication type and GS 01C25T04-01EN for PROFIBUS PA communication type for the items marked with “◊.”
□ SPAN AND RANGE LIMITS
Measurement Span/Range kPa inH2O (/D1) mbar (/D3) mmH2O (/D4)
F* Span 0.1 to 5 0.4 to 20 1 to 50 10 to 500
Range -5 to 5 -20 to 20 -50 to 50 -500 to 500
L* Span 0.1 to 10 0.4 to 40 1 to 100 10 to 1000
Range -10 to 10 -40 to 40 -100 to 100 -1000 to 1000
M Span 0.5 to 100 2 to 400 5 to 1000 50 to 10000
Range -100 to 100 -400 to 400 -1000 to 1000 -10000 to 10000
H Span 2.5 to 500 10 to 2000 25 to 5000 0.025 to 5 kgf/cm2
Range -500 to 500 -2000 to 2000 -5000 to 5000 -5 to 5 kgf/cm2
V Span 0.07 to 14 MPa 10 to 2000 psi 0.7 to 140 bar 0.7 to 140 kgf/cm2
Range -0.5 to 14 MPa -71 to 2000 -5 to 140 bar -5 to 140 kgf/cm2

*: F capsule is applicable for wetted parts material code S. L capsule is applicable for wetted parts material code other than S.
EJX110A压力变送器
□ PERFORMANCE SPECIFICATIONS
Zero-based calibrated span, linear output, wetted parts material code S and silicone oil, unless otherwise mentioned. For Fieldbus and PROFIBUS PA communication types, use calibrated range instead of span in the following specifications.
Specification ConformanceEJX series ensures specification conformance to at least ±3σ.
Reference Accuracy of Calibrated Span(includes terminal-based linearity, hysteresis, and repeatability)
西安经销横河压力变送器进口横河川仪EJX110A压力变送器横河压力变送器差压变送器