POM美国杜邦527UVE熔流率15g

POM美国杜邦
527UVE
POM美国杜邦代理商
上海
DuPont Performance Polymers Delrin® 500TE NC010 POM-I
DuPont Performance Polymers Delrin® 500TL NC010 POM-SD
DuPont Performance Polymers Delrin® 510GR NC000 POM-GF10
DuPont Performance Polymers Delrin® 511DP BK402 POM
DuPont Performance Polymers Delrin® 511DP NC010 POM
DuPont Performance Polymers Delrin® 520MP NC010 POM-SD20
DuPont Performance Polymers Delrin® 525GR BK000 POM-GF25
DuPont Performance Polymers Delrin® 525GR NC000 POM-GF25
DuPont Performance Polymers Delrin® 527UV BK701 POM
DuPont Performance Polymers Delrin® 527UV NC010 POM
DuPont Performance Polymers Delrin® 527UVE NC010 POM
DuPont Performance Polymers Delrin® 527UVE RD402 POM
DuPont Performance Polymers Delrin® 570 NC000 POM-GF20
DuPont Performance Polymers Delrin® 577 BK000 POM-GF20
DuPont Performance Polymers Delrin® 900P BK602 POM
DuPont Performance Polymers Delrin® 900P NC010 POM
DuPont Performance Polymers Delrin® 911DP BK402 POM
DuPont Performance Polymers Delrin® 911DP NC010 POM
DuPont Performance Polymers Delrin® FG100AL NC010 POM-S
DuPont Performance Polymers Delrin® FG100P NC010 POM
DuPont Performance Polymers Delrin® FG100TL NC010 POM
DuPont Performance Polymers Delrin® FG150 NC010 POM
DuPont Performance Polymers Delrin® FG311DP NC010 POM
DuPont Performance Polymers Delrin® FG400MTD BLA079 POM-MED(Fe)
DuPont Performance Polymers Delrin® FG400XRD NC010 POM-XD25
DuPont Performance Polymers Delrin® FG500AL NC010 POM-S
DuPont Performance Polymers Delrin® FG500MP NC010 POM
DuPont Performance Polymers Delrin® FG500P NC010 POM
DuPont Performance Polymers Delrin® FG500TL NC010 POM-SD
DuPont Performance Polymers Delrin® FG511DP NC010 POM
DuPont Performance Polymers Delrin® FG900P NC010 POM
DuPont Performance Polymers Delrin® PC650 NC010 POM
DuPont Performance Polymers Delrin® PC652 NC010 POM
DuPont Performance Polymers Delrin® PC690 NC010 POM
DuPont Performance Polymers Delrin® PC691 NC010 POM-S
DuPont Performance Polymers Delrin® PC699 NC010 POM
DuPont Performance Polymers Delrin® SC631 NC010 POM
DuPont Performance Polymers Delrin® SC652 NC010 POM
DuPont Performance Polymers Delrin® SC655 NC010 POM
DuPont Performance Polymers Delrin® SC690 NC010 POM
DuPont Performance Polymers Delrin® SC699 NC010 POM 电学性能
POM的电绝缘性较好，几乎不受温度和湿度的影响；介电常数和介电损耗在很宽的温度、湿度和频率范围内变化很小；耐电弧性，并可在高温下保持。POM的介电强度与厚度有关，厚度0.127mm时为82.7kV/mm，厚度为1.88mm时为23.6kV/mm。
 环境性能
POM不耐强酸和氧化剂，对烯酸及弱酸有一定的稳定性。POM的耐溶剂性良好，可耐烃类、醇类、醛类、醚类、汽油、润滑油及弱碱等，并可在高温下保持相当的化学稳定性。吸水性小，尺寸稳定性好。
POM的耐候性不好，长期在紫外线作用下，力学性能下降，表面发生粉化和龟裂。
成形性
结晶料，熔融范围窄，熔融和凝固快，料温稍低于熔融温度即发生结晶。流动性中等。吸湿小，可不经干燥处理。
​高粘度缩醛均聚物 POM美国杜邦 100P NC010霆尔塑化科技华南代理商”的详细描述:
DuPont™
 Delrin
®
acetal resin
Delrin®
 100P NC010 
Identification
 Resin Identification ISO 1043 POM
 Part Marking Code ISO 11469 >POM<<br /> Mechanical
 Yield Stress ISO 527 MPa  (kpsi) 70  (10.2)
 Yield Strain ISO 527 % 25
 Strain at Break ISO 527 %
   50mm/min 65
 Nominal Strain at Break ISO 527 % 45
 Tensile Modulus ISO 527 MPa  (kpsi) 2900  (420)
 Tensile Creep Modulus ISO 899 MPa  (kpsi)
       1h 2700  (392)
   1000h 1500  (218)
 Flexural Modulus ISO 178 MPa  (kpsi) 2600  (377)
 Flexural Stress ISO 178 MPa  (kpsi)
   @ 3.5% Strain 74  (10.7)
 Notched Charpy Impact Strength ISO 179/1eA kJ/m
2
   -30°C (-22°F) 11
   23°C (73°F) 14
 Unnotched Charpy Impact Strength ISO 179/1eU kJ/m
2
   -30°C (-22°F) 350
   23°C (73°F) N
Contact DuPont for Material Safety Data Sheet, general guides and/or additional information about ventilation, handling, purging, drying, etc
ISO Mechanical properties measured at 4.0mm, ISO Electrical properties measured at 2.0mm, and all ASTM properties measured at 3.2mm. 
Test temperatures are 23°C unless otherwise stated.
The DuPont Oval Logo, DuPont™, The miracles of science™ and Delrin® are trademarks or registered trademarks of DuPont Company. Copyright© 2010
100216/100930 
The information provided in this data sheet corresponds to our knowledge on the subject at the date of its publication. This information may be subject to revision as new
knowledge and experience becomes available. The data provided fall within the normal range of product properties and relate only to the specific material designated; these
data may not be valid for such material used in combination with any other materials, additives or pigments or in any process, unless expressly indicated otherwise
The data provided should not be used to establish specification limits or used alone as the basis of design; they are not intended to substitute for any testing you 
may need to conduct to determine for yourself the suitability of a specific material for your particular purposes. Since DuPont cannot anticipate all variations 
in actual end-use conditions DuPont makes no warranties and assumes no liability in connection with any use of this information. Nothing in this
publication is to be considered as a license to operate under or a recommendation to infringe any patent rights.  DuPont advises you to seek independent  
counsel for a freedom to practice opinion on the intended application or end-use of our products. CAUTION:   Do not use DuPont materials in medical    
application involving implantation in the human body or contact with internal body fluids or tissues unless the material has been provided from DuPont under
a written contract that is consistent with DuPont policy regarding medical applications and expressly acknowledges the contemplated use. For further information, 
please contact your DuPont representative.  You may also request a copy of DuPont POLICY Regarding Medical Applications H-50103-3 and   
DuPont CAUTION Regarding Medical Applications … H-50102-3
 
Delrin®
 100P is a high viscosity acetal homopolymer for use in easy to fill molds. It has improved processing thermal 
stability, good mechanical properties, toughness, and low volatile emissions.
Property Test Method Units Value
1 / 4Product Information 
Delrin®
 100P NC010 
Thermal
 Deflection Temperature ISO 75-1/-2  °C  (°F)
   0.45MPa 160  (320)
   1.80MPa 93  (200)
 Melting Temperature ISO 11357-1/-3  °C  (°F)
   10°C/min 178  (352)
 CLTE, Parallel ISO 11359-1/-2 E-4/C  (E-4/F)
   -40 - 23°C (-40 - 73°F) 1.1  (0.61)
   23 - 55°C (73 - 130°F) 1.1  (0.61)
   55 - 100°C (130 - 212°F) 1.5  (0.84)
 CLTE, Normal ISO 11359-1/-2 E-4/C  (E-4/F)
   -40 - 23°C (-40 - 73°F) 1.0  (0.56)
   23 - 55°C (73 - 130°F) 1.1  (0.61)
   55 - 100°C (130 - 212°F) 1.5  (0.82)
 Specific Heat ISO 11357-4 J/kg K  (Btu/lb F) 3000  (0.71)
 Vicat Softening Temperature ISO 306  °C  (°F)
   50N 160  (320)
Rheological
 Melt Mass-Flow Rate ISO 1133 g/10 min
   190°C, 2.16kg 2.5
 Melt Volume-Flow Rate ISO 1133 cm
3
/10 min  (ml/10 min) 1.9
Electrical
 Surface Resistivity IEC 60093 ohm >1E15
 Volume Resistivity IEC 60093 ohm m 1E12
 Relative Permittivity IEC 60250
   1E2 Hz 3.8
   1E6 Hz 3.7
 Dissipation Factor IEC 60250 E-4
   1E6 Hz 40
 CTI IEC 60112 V 600
Contact DuPont for Material Safety Data Sheet, general guides and/or additional information about ventilation, handling, purging, drying, etc
ISO Mechanical properties measured at 4.0mm, ISO Electrical properties measured at 2.0mm, and all ASTM properties measured at 3.2mm. 
Test temperatures are 23°C unless otherwise stated.
The DuPont Oval Logo, DuPont™, The miracles of science™ and Delrin® are trademarks or registered trademarks of DuPont Company. Copyright© 2010
100216/100930 
The information provided in this data sheet corresponds to our knowledge on the subject at the date of its publication. This information may be subject to revision as new
knowledge and experience becomes available. The data provided fall within the normal range of product properties and relate only to the specific material designated; these
data may not be valid for such material used in combination with any other materials, additives or pigments or in any process, unless expressly indicated otherwise
The data provided should not be used to establish specification limits or used alone as the basis of design; they are not intended to substitute for any testing you 
may need to conduct to determine for yourself the suitability of a specific material for your particular purposes. Since DuPont cannot anticipate all variations 
in actual end-use conditions DuPont makes no warranties and assumes no liability in connection with any use of this information. Nothing in this
publication is to be considered as a license to operate under or a recommendation to infringe any patent rights.  DuPont advises you to seek independent  
counsel for a freedom to practice opinion on the intended application or end-use of our products. CAUTION:   Do not use DuPont materials in medical    
application involving implantation in the human body or contact with internal body fluids or tissues unless the material has been provided from DuPont under
a written contract that is consistent with DuPont policy regarding medical applications and expressly acknowledges the contemplated use. For further information, 
please contact your DuPont representative.  You may also request a copy of DuPont POLICY Regarding Medical Applications H-50103-3 and   
DuPont CAUTION Regarding Medical Applications … H-50102-3