缓蚀阻垢剂AK-700
▲ AK-700主要由特殊界面活性剂、分散剂、缓蚀剂等组成，适用于普通水质作冷却介质的系统；
▲ AK-700是一种混合型缓蚀剂，主要通过抑制金属的极化起到缓蚀作用；
▲ AK-700不含铬酸盐等有毒物质，对环境；
▲ AK-700正常使用时对碳钢腐蚀速率远低于国家标准；
▲ 对氯离子300mg/L同时钙镁含量高的腐蚀性水的缓蚀效果同样达标，阻垢性能优。
二、技术指标
项目 指标
外观 黄色透明液体
PH(1%) 3.0±1.5
比重 (25℃ g/cm3) 1.10±0.05
固含量%≥ 21
三、使用方法
▲ 将每天所需的缓蚀阻垢剂AK-700加入塑料加药桶(或箱)内；
▲ 为方便使用可加软水稀释后用计量泵或通过调节阀门将药剂在循环泵入口处(即集水池出口处)连续加入；
▲ 加药浓度一般为20-50mg/L(以补充水量计)。
四、包装与储存
※ 缓蚀阻垢剂AK-700采用塑料桶包装，25kg／桶或根据用户需要确定；
※ 储存于阴凉处，储存期十二个月。
五、安全与防护
缓蚀阻垢剂AK-700为弱酸性，操作时注意劳动保护，应避免与皮肤、眼睛等接触，接触后用大量清水冲洗。
商家推荐产品
相关阅读
-
张北厚膜电路汉高ABLESTIKJM7000导电胶,乐泰导电胶
LOCTITE ABLESTIK JM 7000 die attach adhesive has been formulated for use in high throughput die attach applications. This material has been used successfully on rigid substrates with die sizes up to 700 mils. LOCTITE ABLESTIK JM 7000 has be
2024年06月10日 14:59:10
-
汉高乐泰导电胶,齐齐哈尔半导体材料汉高ABLESTIKJM7000导电胶
LOCTITE ABLESTIK JM 7000 die attach adhesive has been formulated for use in high throughput die attach applications. This material has been used successfully on rigid substrates with die sizes up to 700 mils. LOCTITE ABLESTIK JM 7000 has be
2024年06月10日 14:54:23
-
房山高导热汉高ABLESTIKJM7000导电胶,汉高导电胶
LOCTITE ABLESTIK JM 7000 die attach adhesive has been formulated for use in high throughput die attach applications. This material has been used successfully on rigid substrates with die sizes up to 700 mils. LOCTITE ABLESTIK JM 7000 has be
2024年06月10日 14:54:10
-
汉高乐泰导电胶,柳州厚膜电路汉高ABLESTIKJM7000导电胶
LOCTITE ABLESTIK JM 7000 die attach adhesive has been formulated for use in high throughput die attach applications. This material has been used successfully on rigid substrates with die sizes up to 700 mils. LOCTITE ABLESTIK JM 7000 has be
2024年06月10日 14:44:31
-
汉高汉高导电胶,抚州半导体材料汉高ABLESTIKJM7000导电胶
LOCTITE ABLESTIK JM 7000 die attach adhesive has been formulated for use in high throughput die attach applications. This material has been used successfully on rigid substrates with die sizes up to 700 mils. LOCTITE ABLESTIK JM 7000 has be
2024年06月10日 14:44:26
-
邯郸厚膜汉高ABLESTIKJM7000导电胶,汉高导电胶
LOCTITE ABLESTIK JM 7000 die attach adhesive has been formulated for use in high throughput die attach applications. This material has been used successfully on rigid substrates with die sizes up to 700 mils. LOCTITE ABLESTIK JM 7000 has be
2024年06月10日 14:42:32