厂家JHE系列卧式砂磨机盘式砂磨机

广州金宗机械厂家卧式砂磨机 盘式砂磨机
概述Brief introduction
卧式盘式砂磨机广泛应用于涂料设备与新能源生产设备，本机采用偏心盘研磨结构，按一定分布顺序安装在搅拌轴上，该系统克服了传统研磨机研磨介质分布不均的缺点，使研磨介质能够得到大的能量传递，研磨，采用进口德国（BURGMANN）公司生产的带有强冷却的双端面机械密封装置，密封效果好，运行可靠。分离系统采用大流量动态缝隙式分离器，在大流量状况下不会发生出料口堵塞，过流面积大，缝隙宽度0.05mm-2.0mm。可使用0.1mm以上研磨介质。根据物料的具体要求，研磨腔可根据不同的材料进行设计。
Horizontal disc grinder is widely used in coatings equipment and new energy production equipment. This machine adopts eccentric disc grinding structure and is installed on the stirring shaft in a certain distribution order. This system overcomes the shortcoming of uneven distribution of grinding media in traditional grinder, makes the grinding media get maximum energy transfer and high grinding efficiency. It is produced by BURGMANN. Strong cooling double-end mechanical seal device has good sealing effect and reliable operation. In the separation system, a large flow dynamic slot separator is used, and there is no blockage at the outlet under the condition of large flow. The flow area is large, and the width of the slot is 0.05 mm-2.0 mm. Abrasive media over 0.1mm can be used. According to the specific requirements of materials, the grinding chamber can be designed according to different materials.

性能Performance
1、开放的分离系统DCC系统；
2、大部分的研磨球在分离区域被自动挡回；
3、研磨介质被离心力牵引回研磨区域，产品则沿轴的方向通过分级盘上的孔进入分离区域；
4、内部循环流的形成，有效抵消了轴向产品的流动；
5、研磨盘更换便宜且方便；
6、研磨盘可以采用不同的特殊材料制作；
7、可采用非球状研磨介质。
1. Open separation system DCC system;
2. Most of the grinding balls are automatically blocked back in the separation area.
3. The grinding medium is pulled back to the grinding area by centrifugal force, and the product enters the separation area through the holes on the grading disc along the axis direction.
4. The formation of internal circulating flow effectively counteracts the flow of axial products.
5. The replacement of abrasive disc is cheap and convenient.
6. The abrasive disc can be made of different special materials.
7. Non-spherical abrasive medium can be used.