POE供电器60W百兆千兆100米传输

Gigabit 4P PoE Injector Model: PSE156G IEEE802.3bt

Advanced PoE Solution
The PSE156G is a Gigabit Power over Ethernet Injector with one Ethernet Input (data only) port and one Output (data + power) port that is designed for small or medium network environments. The PSE156G supplies remote power for new applications such as wireless access points, pan-tilt-zoom (PTZ) IP cameras and videophones. It complies with IEEE 802.3bt PoE standard. It can work with 10/100Base-T networking devices and emerging 1000Base-T devices such as Wi-MAX and wireless IEEE 802.11n access points. By adding a PoE Splitter to existing non-PoE networking equipment, installing networking products such as Access Points and IP cameras can easily be performed. Wireless device deployments are easily located without the need for power outlets and network administrators don’t need to use AC power adapters anymore. For all the function featured in PSE156G, people can get the benefit of flexible network installation at lower cost, less downtime.

























Key Features
- Up to 60W of Power on 4-pairs
- IEEE 802.3bt Compliant
- Safe on Low Power Devices Receive Only the Power They Need
- Safe and Reliable Power to WLAN Access Points
- Automatic Detection and Protection of Non–standard Ethernet Terminals
- Supports 10/100/1000Base-T LAN environment
- Unique interlocking feature for easy installation


Technical Specifications Standards Compliance Dimensions (L x W x H) / Weight
39*62.7*145mm
IEEE 802.3 10Base-T Ethernet 490g
IEEE 802.3u 100Base-Tx Fast Ethernet Indicators
IEEE 802.3bt Power over Ethernet AC Power (Green)
Connector: RJ-45 10/100/1000 Mbps PoE (Orange)
PoE Power Output Environmental Conditions
Pin Assignment and Polarity: Operating Temperature: -20 ~ 60°C
Data+Power Pairs 1/2 (+), 3/6 (-); Storage Temperature: -10 ~ 70°C
Power Pairs 4/5 (+), 7/8 (-) Storage Humidity:
Output Power Voltage: 54-56 VDC Maximum 95%, Non-condensing
Power: Mode-A/30 Watts Max.
Mode-B/30 Watts Max.
Input Power AC Input Voltage: 100~240VAC
Requirements AC Input Current: ≤1.5A @ 100~240 VAC


at 4-pair Standard标准
PoE :1,2+/3,6- 4,5+/7,8-八芯供电
端口功率: 60 WattsMaximum
Input Power AC Input Voltage: 100~240VAC
POE数据和电传输距离100米
重量:400g
大小:39*62.7*145mm
10/100/1000千兆