全国供应实验室小坩埚熔银坩埚石墨坩埚熔铜坩埚熔金坩埚厂家300-1#

感应电炉坩埚安装注意事项
Note for installation of induction furnace crucible
1. 坩埚底要在线圈以上。The crucible bottom should be above the first coil.
2. 坩埚上口与炉的上面炉板平行。The upper opening of the crucible is parallel to the uppermost furnace plate of the furnace.
3. 如坩埚与线圈的间距小了，可用水玻璃把石英砂搅湿（三分之一的水玻璃，三分之二的水，用手将拌湿的石英砂攥成团，一抖散开即可）填充，填充时一定要夯实。
If the distance between the crucible and the coil is small, the quartz sand can be filled with water glass to fill it, and it must be compacted when filling.(1/3 water glass, 2/3 water, hand mixing wet sand clenched into a group, a shaking spread)
4. 开始一定要小功率烘炉，如用大功率会击穿坩埚。Be sure to start a small power oven, if the high-power will break through the crucible.
5. 中频感应炉的炉中间位置功率大，是熔化带，注意水循环的畅通。
Medium frequency induction furnace has more power in the middle position, is the melting zone, and pay attention to the smooth flow of water.
以上资料仅供客户参考碳化硅坩埚石墨坩埚廊坊
The above information is for reference only.