东莞叉车蓄电池批发，东莞电动叉车蓄电池维修保养

东莞叉车蓄电池品牌大全推荐贝朗斯牌叉车电瓶配套使用，深循环寿命达1500次以上，符合进口、国产电动叉车安装标准，技术参数明确，完全媲美进口叉车电池，型号，目前在东莞地区拥有多家叉车蓄电池经销商，广泛应用到各种搬运车辆上，东莞市是国内外企业集中地，电瓶叉车使用比较多，企业环保意识比较强，叉车蓄电池是电动叉车牵引力来源，所以未来几年将大量得到普及。贝朗斯牌叉车蓄电池作为牵引动力，服务及时，配送快捷，凡是购买的用户得到二年的质保，我们讲求使用体验度，客户的满意度一直是我们不懈的追求。火炬蓄电池

在叉车蓄电池使用过程中，尽可能少使用临时长距离放慢，当车辆起步，速率进步后，稳住放慢踏板，如路况较好，车辆会继续放慢，车辆需加速时，抓紧放慢踏板，轻踏制动踏板，这样可充沛使用加速的能量，假如车辆具备再生制动功能，便可使加速时的动能得以发出，车辆在坡道上行时，不要断开驱动电动机的电路，微微踩下制动踏板，使车辆运行于再生制动情况，使用车辆上行的动能,增添蓄电池的能量耗费，在叉车行驶进程中，除非需要紧急加速,否则不要间接将制动踏板踏终究，假如在叉车行驶进程中发明电池电量不足时(可通过电量表、电源亏电指示灯和其余报警安装失去)，应从速对于蓄电池开始充电，避免蓄电池适量放电。http://www.ccsobattery.com/yyzsshow.asp?nid=489&lid=90

为防止叉车电池产生硫化现象，应每隔一定时间（正常使用的蓄电池每2~3个月，或长时间搁置未使用的蓄电池），均应进行一次预防性过充电，即有意识的延长充电时间，让蓄电池充电更些，以消除可能产生的轻微硫化。具体做法是：在正常的充电结束后休息1小时，再用第二阶段充电电流继续充电，直到电解液剧烈地产生气泡，再休息1小时，然后再恢复第2阶段的充电，如此循环直到接通充电电源1~2分钟蓄电池内就产生大量的气泡为止。对于电池组中的“落后电池”（充放电过程中电压值低于其它电池及因故障检修过的电池）均应进行单的均衡充电，均衡充电的方法；以0.1I5（A）电流进行充电，充至电压达到2.5V/只，电池内有气泡发生时减半电流（即0.05I5（A））继续充电，充至充足电状态时停止，休息0.5小时后再减半电流（即0.025I5（A））充电1小时，再停充0.5小时后用0.025I5（A）的电流充电1小时，如此反复充电直至充电即一合闸电池内就有气泡激烈发生为止。 叉车蓄电池的充电称为初充电，初充电对蓄电池的使用寿命和电荷容量有很大的影响。若充电不足，则蓄电池电荷容量不高，使用寿命也短；若充电过量，则蓄电池电气性能虽然好，但也会缩短它的使用寿命，所以新蓄电池要小心谨慎地进行初充电。对于普通蓄电池在使用定要按充电规范进行初充电。对于干荷电铅蓄电池，按使用说明书，虽然在规定的两年储存期内若需使用，只要加入规定密度的电解液搁置15min。

Dongguan forklift battery brands recommended brand forklift battery shell lens supporting the use of the deep cycle life of more than 1500, with imports, domestic electric forklift installation standards, technical parameters of clear, fully comparable with the imported forklift battery, model complete, is currently in the Dongguan area have a number of forklift battery distributors, widely used in a variety of transportation vehicles. Dongguan city is the focus of domestic and foreign enterprises, the use of forklift more, corporate environmental awareness is relatively strong, forklift battery electric forklift is traction source, so the next few years will be a lot of popularity. Beckham brand forklift battery lens as traction power industry benchmarking, timely service, fast delivery, users who buy two years warranty, we emphasize the use of experience, customer satisfaction is our unremitting pursuit.

东莞叉车蓄电池

The forklift battery use, less use of temporary long distance to slow down as much as possible, when the vehicle is started, the rate of progress, steady slow down pedal, such as better road conditions, the vehicle will continue to slow down, the vehicle needs to accelerate, to slow down the pedal, gently depress the brake pedal so as to make full use of accelerating energy, if the vehicle with regenerative braking the function, can make the kinetic energy during acceleration can be issued, the vehicle on the ramp up, do not disconnect the circuit of the drive motor, a brake pedal, the vehicle running on the regenerative braking, the kinetic energy of vehicle use up, add the battery energy consumption in forklift driving process, unless required emergency, otherwise the brake pedal will not indirectly, if the battery in the invention of forklift driving process (through the power meter, the power loss of power indicator Light and other alarm installation lost, should start charging as soon as possible, avoid battery proper discharge.
In order to prevent the phenomenon of sulfide produced forklift batteries, should be at regular intervals (the normal use of the battery every 2~3 months, or long time use of the battery is not used), shall conduct a preventive charging, the charging time of the extension of consciousness, let the battery charging some more thoroughly, in order to eliminate the possible minor sulfide. The specific approach is: 1 hours of rest in normal after charging, then the second stage charging current to charge, until the electrolyte violently bubbles, and then rest for 1 hours, and then recharge the second stage, so the cycle until 1~2 minutes in the battery charging power supply connected to generate a large amount of bubbles. For behind the battery in battery "(voltage charge and discharge process is lower than other batteries and battery for troubleshooting before) should be a separate balanced charge, equalizing charge method; 0.1I5 (A) charging current, charging voltage reaches to 2.5V/, the battery has halved the current bubble occurs (0.05I5 (A)) to stop charging, charging to the fully charged state, after 0.5 hours of rest in half again current (0.025I5 (A)) charging for 1 hours, then stop charging 0.5 hours with 0.025I5 (A) of the current charging for 1 hours, so that a battery charging charge until the closing period a bubble occurs so fierce. The first charge of a forklift battery is called initial charge, and the initial charge has a great influence on the service life and charge capacity of the battery. If the charge is insufficient, the battery charge capacity is not high, the service life is short; if excessive charging, the battery electrical performance is good, but also can shorten its service life, so the new battery should be carefully carried out the initial charge. For ordinary storage battery, before use, be sure to charge according to the charging standard. For dry charged lead-acid batteries, according to the instruction manual, if required for use during the specified two-year storage period, as long as the electrolyte of the specified density is used, the 15min shall be used.