内外涂塑热浸塑钢管电缆穿线管

热浸塑电力钢管集钢管与塑料管的优点于一身，具有很强的耐老化性能和耐防腐性能，机械强度高，承压力强，耐候性、绝缘性能优良，内外表面光滑，摩擦系数小，吸水率低，适应温度范围大等特点，是传统电缆穿线管的升级换代产品。电缆保护管采用的承插式连接方式，设计合理、连接kuaisu、简易安全、经济实用.埋地电缆用涂塑钢管是以钢管为基体，通过特殊工艺在内壁熔融喷涂或吸附食品级环氧末涂料或PE原料经高温固化而成的新型复合材料。具有优良的耐腐蚀性和比较小的摩擦阻力。环氧树脂涂塑钢管适用于给排水、海水、温水、油、气体等介质的输送，聚氯乙烯（PVC）涂塑钢管适用于排水、海水、油、气体等介质的输送。
热浸塑电力钢管，是引进国外的技术和工艺研发生产的一种新型绿色环保管道，并取得电力工业电气设备质量检验测试中心签发的检测报告证书，产品符合G2电气安装用导管的技术要求，通用要求标准。内外防腐层可使用FPE聚乙烯粉末、环氧树脂粉末，经特殊工艺使用塑料层与钢管层内外壁高温熔结，与钢管有的结合力，涂层表面光滑、美观。热浸塑电力钢管集钢管与塑料管的优点于一身，具有很强的耐老化性能和耐防腐性能，机械强度高，承压力强，耐候性、绝缘性能优良，内外表面光滑，摩擦系数小，吸水率低，适应温度范围大等特点，是传统电缆穿线管的升级换代产品。
热浸塑电缆保护钢管抗干扰能力很强，可以很好地屏蔽外界的干扰信号。而如果将涂塑钢管用在电线套管上，就可以起到绝缘的作用，不会发生漏电现象，大大增加了安全系数。后它的管壁非常光滑，施工时的电线电缆等穿过它都十分方便。电力用内外涂塑钢管是一种复合型管材，它的内壁融溶聚乙烯，树脂，聚氯乙烯，乙烯-丙烯酸等有机物，涂层的厚度大概0.5 ～ 1.0mm。它的产生，成功的杜绝了钢管和塑料管的缺点，寿命高达50年左右。它的优点显而易见，比如承压能力好，大压强高达6Mpa。它特的材质构成，导致他适合极其恶劣的环境，埋在地下以及潮湿环境里，并且耐高温和及低温。
Hot - dipped plastic electric steel tube integrates the advantages of steel tube and plastic tube, has strong aging resistance and corrosion resistance, high mechanical strength, strong bearing pressure, excellent weather resistance and insulation performance, smooth inner and outer surfaces, small friction coefficient, low water absorption, wide temperature range and other characteristics, and is an upgraded and updated product of traditional cable conduit. Socket connection method adopted for cable protection tubes is reasonable in design, simple, safe, economic and practical. plastic coated steel tubes for buried cables are new composite materials which are made of steel tubes as the matrix and melt sprayed or adsorbed food-grade epoxy powder coatings or PE raw materials on the inner wall by special processes and solidified at high temperature. Has excellent corrosion resistance and relatively small frictional resistance. Epoxy resin coated steel tubes are suitable for the transportation of water supply and drainage, seawater, warm water, oil, gas and other media, and polyvinyl chloride ( PVC ) coated steel tubes are suitable for the transportation of water drainage, seawater, oil, gas and other media. Hot - dipped plastic electric steel pipe is a new type of green environmental protection pipe which is developed and produced by introducing advanced foreign technologies and processes, and has obtained the inspection report certificate issued by the quality inspection and testing center of electric equipment in the electric power industry. the product meets the technical requirements and general requirements of G2 electric installation conduit. Fpe polyethylene powder and epoxy resin powder can be used for the inner and outer anticorrosive coatings, and plastic layer and inner and outer walls of steel tube layer are fused at high temperature by special process, which has strong binding force with steel tube, and the coating surface is smooth and beautiful. Hot - dipped plastic electric steel tube integrates the advantages of steel tube and plastic tube, has strong aging resistance and corrosion resistance, high mechanical strength, strong bearing pressure, excellent weather resistance and insulation performance, smooth inner and outer surfaces, small friction coefficient, low water absorption, wide temperature range and other characteristics, and is an upgraded and updated product of traditional cable conduit. Thermal dip plastic cable can protect steel tubes from interference, and it can shield interference signals from the outside world. However, if plastic-coated steel tubes are used on wire sleeves, they can play an insulating role, and leakage phenomenon will not occur, which greatly increases the safety factor. Finally, its pipe wall is very smooth, and it is very convenient for wires and cables to pass through it during construction. Internal and external plastic coated steel pipe for electric power is a kind of composite pipe. its inner wall melts polyethylene, resin, nontoxic polyvinyl chloride, ethylene-acrylic acid and other organic substances, and the thickness of the coating is about 0.5 ~ 1.0 mm. Its production successfully eliminated the shortcomings of steel tubes and plastic tubes, and its service life reached about 50 years. Its advantages are obvious, such as good bearing capacity and maximum pressure up to 6 MPa. Its unique material composition makes it suitable for extremely harsh environments, buried in underground and humid environments, and high and low temperature resistant.