东莞锡华XH-433双螺杆实验型造粒机小型造粒机

XH-433双螺杆实验型造粒线

XH-433 Twin screw experimental granulation line
简介：本机适合工程塑胶、改性塑胶、废旧塑胶、色母粒的混炼加工实验。具有均质、塑化着色、填充改性等功能。
Introduction: This machine is suitable for mixing and processing experiments of engineering plastics, modified plastics, waste plastics and masterbatches. It has homogeneous, plastic coloring, filling modification functions.

工作原理：本机通过加热、混合，剪切、塑化、压实排气作用下，物料塑化成均匀的熔体，并在双螺杆的挤压下，通过机头挤出圆形的条状料，经冷却水槽水冷后或者风冷后，再经切粒机切粒，得到塑胶粒料。
Working principle: Under the action of heating, mixing, shearing, plasticizing and compacting the exhaust, the material is plastified into a uniform melt, and extruded under the twin-screw and extruded through the nose into round strips. The long strips after being cooled by water in the cooling water tank or after being air-cooled, then pelletized by a pelletizer to obtain plastic pellets.

技术参数(Technical Parameters)：
型号
Model No.
XH-433-25
XH-433-40
控制系统
Control system
PLC控制
PLC control
PLC控制
PLC control
产量（kg)
Capacity
约1-10kg/h根据工艺配方
1-10kg/h(decide by formula )
约60/h根据工艺配方
60/h(decide by formula )
螺杆直径
Screw diameter
21.7mm或
21.7mm or customized
40mm或
40mm or customized
长径比
L/D
1：40
1：48
螺杆转速rpm
Screw speed
0-300
50-500
冷却装置
Cooling device
风冷/水冷（可选配）
Air/water cooling (optional)
风冷/水冷（可选配）
Air/water cooling (optional)
风机
Fan
1/4HP
3HP
切粒机(原有切粒装置)
Cutting device
切粒机Granulator
切粒机Granulator
电源
Power Supply
3∮，AC380
3∮，AC380