PC 台湾奇美 PC-122U 抗紫外线 PC 台湾奇美 PC-122U 抗紫外线
优点:高韧性高强度低蠕变耐磨抗氧化耐热抗冲击耐疲劳尺寸稳定
耐热老化绝缘性耐候性低收缩韧性好高流动高透明易脱模高刚性
食品级抗紫外线电气性好玻纤增强阻燃防火润滑抗静电
PC 台湾奇美 PC-122U 抗紫外线
PC PC-122U 台湾奇美
用途: 其它
重要参数: 熔体流动速率:22 g/10min 密度:1.2 g/cm3 吸水率:0.2 % 成型收缩率:0.6 % 断裂伸长率:110 % 弯曲强度:90 MPa 弯曲模量:2353 MPa 硬度:77 热变形温度:125 ℃ 透光率:89 %
生产厂商:台湾奇美实业股份有限公司
PC PC-110V 台湾奇美
用途: 家电部件,汽车部件
重要参数: 密度:1.2 g/cm3 缺口冲击强度:87 弯曲强度:920 MPa 热变形温度:125 ℃
介绍:
PC的粘接:QN-505,双组分胶,胶层柔软,适合PC塑料大面积粘接或复合。但耐高温性能较差;
PC的粘接:QN-906:双组分胶,耐高温;
PC的粘接:G-988:单组份室温粘接胶,固化后是弹性体具有的防水,防震粘合剂,耐高低温, 1-2mm厚度的话,15分钟左右初固,5-6小时基本固化,有一定的强度。完全固化的话需要至少24小时。单组份,不需要混合,挤出后涂抹静置即可,无需加温.
详解:
Harry had just descended the last marble step into the Entrance Hall when Malfoy, Crabbe and Goyle emerged from a door on the right that Harry knew led down to the Slytherin common room. Harry stopped dead; so did Malfoy and the others. The only sounds were the shouts, laughter and splashes drifting into the Hall from the grounds through the open front doors.