常州供应K222-KGV4帝斯曼(DSM)加玻纤无卤阻燃PA6胶料

1/6

取消

常州供应K222-KGV4帝斯曼(DSM)加玻纤无卤阻燃PA6胶料，含20%玻璃纤维增强，热稳定，灼热丝960，适用于电子电气行业。

荷兰DSM PA6 Akulon K222-KGV4物性：

Physical	Dry	Conditioned	Unit	Test Method
Density	1.34	--	g/cm³	ISO 1183
Molding Shrinkage				ISO 294-4
Across Flow	1.0	--	%
Flow	0.60	--	%
Water Absorption (Saturation, 23°C)	6.5	--	%	ISO 62
Water Absorption (Equilibrium, 23°C, 50% RH)	2.0	--	%	ISO 62
Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus	5700	2500	MPa	ISO 527-2
Tensile Stress (Break)	80.0	45.0	MPa	ISO 527-2
Tensile Strain (Break)	3.0	15	%	ISO 527-2
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength				ISO 179/1eA
-30°C	4.0	4.0	kJ/m²
23°C	4.0	9.0	kJ/m²
Charpy Unnotched Impact Strength				ISO 179/1eU
-30°C	40	40	kJ/m²
23°C	46	93	kJ/m²
Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature (0.45 MPa, Unannealed)	210	--	°C	ISO 75-2/B
Heat Deflection Temperature (1.8 MPa, Unannealed)	170	--	°C	ISO 75-2/A
Melting Temperature²	220	--	°C	ISO 11357-3
Electrical	Dry	Conditioned	Unit	Test Method
Surface Resistivity	--	1.0E+14	ohms	IEC 60093
Volume Resistivity	1.0E+15	1.0E+13	ohms·cm	IEC 60093
Electric Strength	30	25	kV/mm	IEC 60243-1
Relative Permittivity				IEC 60250
100 Hz	4.30	10.0
1 MHz	3.80	3.90
Dissipation Factor				IEC 60250
100 Hz	0.013	0.30
1 MHz	0.021	0.10
Comparative Tracking Index	600	600	V	IEC 60112
Flammability	Dry	Conditioned	Unit	Test Method
Flammability Classification				IEC 60695-11-10, -20
0.8 mm	V-2	--
1.5 mm	V-2	--
Glow Wire Flammability Index				IEC 60695-2-12
1.0 mm	960	--	°C
1.6 mm	960	--	°C

东莞市恩帝塑胶原料有限公司为你提供的“常州供应K222-KGV4帝斯曼(DSM)加玻纤无卤阻燃PA6胶料”详细介绍

在线留言

信息介绍