上海闵行供应帝斯曼K224-HG6耐破裂耐老化PA6

1/2

取消

上海闵行供应帝斯曼K224-HG6耐破裂耐老化PA6，含30%玻璃纤维增强，热稳定，易脱模，长期耐高温，较高的破裂压力，防化学药品、防高温、防振动，符合当今车辆预期寿命之要求。

荷兰DSM PA6 Akulon K224-HG6 产品物性：

Physical	Dry	Conditioned	Unit	Test Method
Density	1.35	--	g/cm³	ISO 1183
Molding Shrinkage				ISO 294-4
Across Flow	0.90	--	%
Flow	0.30	--	%
Water Absorption (Saturation, 23°C)	6.3	--	%	ISO 62
Water Absorption (Equilibrium, 23°C, 50% RH)	1.9	--	%	ISO 62
Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus	9500	6000	MPa	ISO 527-2
Tensile Stress (Break)	180	110	MPa	ISO 527-2
Tensile Strain (Break)	3.5	7.0	%	ISO 527-2
Flexural Modulus	8600	--	MPa	ISO 178
Flexural Stress	235	--	MPa	ISO 178
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength				ISO 179/1eA
-30°C	11	11	kJ/m²
23°C	12	25	kJ/m²
Charpy Unnotched Impact Strength				ISO 179/1eU
-30°C	75	75	kJ/m²
23°C	90	110	kJ/m²
Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature (0.45 MPa, Unannealed)	220	--	°C	ISO 75-2/B
Heat Deflection Temperature (1.8 MPa, Unannealed)	200	--	°C	ISO 75-2/A
Melting Temperature²	220	--	°C	ISO 11357-3
CLTE - Flow	2.0E-5	--	cm/cm/°C	ISO 11359-2
CLTE - Transverse	7.0E-5	--	cm/cm/°C	ISO 11359-2
Electrical	Dry	Conditioned	Unit	Test Method
Surface Resistivity	--	1.0E+13	ohms	IEC 60093
Volume Resistivity	1.0E+14	1.0E+12	ohms·cm	IEC 60093
Electric Strength	30	15	kV/mm	IEC 60243-1
Relative Permittivity				IEC 60250
100 Hz	3.50	20.0
1 MHz	3.30	5.00
Dissipation Factor				IEC 60250
100 Hz	5.0E-3	0.30
1 MHz	0.015	0.12
Comparative Tracking Index	--	500	V	IEC 60112

东莞市恩帝塑胶原料有限公司为你提供的“上海闵行供应帝斯曼K224-HG6耐破裂耐老化PA6”详细介绍

在线留言

信息介绍