供应商 | 四川梓冠光电科技有限公司 店铺 |
---|---|
认证 | |
报价 | 面议 |
品牌 | 其它 |
材质 | 其它 |
工作温度 | 其它 |
关键词 | 掺铒光纤放大器微型,掺铒光纤放大器,光纤放大器,放大器 |
手机号 | 18190010738 |
总监 | 胡玉涵联系时请一定说明在黄页88网看到 |
所在地 | 绵阳市经开区文武中路218号(电子制造产业园)16幢3层 |
更新时间 | 2024-06-28 03:53:52 |
50mW掺铒光纤放大器微型
50mW Erbium-doped Fiber Amplifier Micro type
掺铒光纤功率放大器(BA,Booster amplifier)通常用于增加-6dBm~+3dBm或更高范围内的光信号功率,大饱和功率为26dBm,通常用于增加激光光源的发射功率。
Erbium-doped fiber power amplifier (BA, Booster-Amplifier) is usually used to increase the power of optical signals in the range of -6dBm~+3dBm or higher, with a maximum saturation power of 26dBm, which is usually used to increase the emission power of laser light sources.
〖特性Features〗
n 宽波长范围
Wide wavelength range
n 高输出功率
High output power
n 低噪音
Low noise
〖应用Applications〗
n 光纤通信
Optical Fiber Communication
n 光纤传感
Fiber optic sensing
n 光纤激光器
Fiber laser
〖规格参数Specification〗
参数 Parameter | 单位 Unit | 典型值 Typ. | 备注 Notes |
波长范围 Wavelrngth Range | nm | 1530~1565 | C Band |
输入功率 Input Power | dBm | -6~+3 | |
饱和输出功率 Saturated Output Power | dBm | 17 | @-3dBm input |
噪声指数 Noise Index | dB | 5.0 | @-3dBm input |
偏振相关增益 Polarization Dependent Gain | dB | <0.3 | |
偏振模色散 Polarization Mode Dispersion | ps | 0.5 | |
输入/输出隔离 Input/Output Isolation | dB | >35 | |
光纤类型 Pigtail Fiber Type | SMF-28 单模光纤(single-mode fiber) | ||
光纤接口类型 Fiber Interface Type | FC/APC | ||
工作模式 Working Mode | ACC / APC | *Note1 | |
控制方法 Control Method | TTL串口通信 TTL serial communication | ||
通信接口 Communication Interface | XH2.54-4PIN | ||
电源 Power Supply | 5V DC, <10W | ||
尺寸 Size | mm | 模块:50(W)×50(D)×15(H) Module:50(W)×50(D)×15(H) | |
工作温度 Operating Temperature | °C | -5~+35°C | |
工作湿度 Operating Humidity Range | 0~70% |
*注1:
ACC模式-自动电流控制:EDFA泵送工作电流由用户设置,并由EDFA自动锁定,以实现恒定的泵送电流。当输入光功率波动时,输出功率也会相应波动,这适用于所有EDFA型号。
APC模式-自动功率控制:EDFA的信号光输出功率由用户设置,PD自动监测并反馈输出功率,EDFA控制和自适应调节泵实现输出信号的稳定。当输入光功率波动时,APC模式使输出功率的波动小化,并且适用于功率型和线型EDFA。
*Note1:
ACC mode - automatic current control: The EDFA pumping operating current is set by the user and automatically locked by the EDFA to achieve a constant pumping current. When the input optical power fluctuates, the output power will also fluctuate accordingly, which is suitable for all EDFA models.
APC mode - automatic power control: The signal light output power of the EDFA is set by the user, the PD automatically monitors and feeds back the output power, the EDFA control and the adaptive adjustment pump achieve the stability of the output signal. When the input optical power fluctuates, the APC mode minimizes the fluctuation of the output power and is suitable for power type and line type EDFA.
〖尺寸图Dimension〗
〖订货信息ordering information〗
波长范围 wavelength range | 尾纤套管直径 Diameter of pigtail casing
| 尾纤长度 Fiber length | 连接头形式 Connector | 封装形式 Packaging |
1530nm~1565nm | 9-0.9mm | 1M others | FC/PC others | B=台式 B=Desktop M=模块 M=Module |
关键词:掺铒光纤放大器微型,掺铒光纤放大器,光纤放大器,放大器