SimradHS80AGNSSCompass

Simrad HS80A GNSS Compass
概述：
The Simrad HS80A GNSS compass is type-approved to the latest IMO regulations including RAIM (Receiver Autonomous Integrity Monitoring). The HS80A delivers heading accuracy of better than 0.5° and provide sub-meter DGPS positioning accuracy. This level of accuracy is achieved in the HS80A from SBAS.
TYPE APPROVALS

Both the HS80A has two IMO compliance certifications which is a big advantage for Simrad customers. A separate IMO compliant antenna is not required as the compasses meet both navigation and heading function approvals.
SUPPLEMENTARY SENSORS

Integrated Gyro and tilt sensors deliver fast start-up times and provide heading updates during temporary loss of satellites.
INTERFACE

The HS80A is supplied with NMEA 2000 as the standard interface, but can be used as a NMEA 0183 device with an optional cable.

描述：

Information
Picth/Roll Angle 1°
Technical/Environmental
Operating Temperature -30°C to + 70°C (-22°F to + 158°F)
Operating Temperature Stored -40°C to + 85°C (-40°F to + 185°F)
Product Width 8.3 in / 209 mm
Product Height 5.8 in / 146 mm
Product Weight 5.4 lbs / 2.4 kg
Product Length [mm] 26.1 in / 663 mm
Other
Humidity Range [rh] 95% non-condensing
Compass Safe Distance [mm] 750
Power
Power Consumption 4.3 W nominal (GPS L1 + GLONASS L1)
4.6 W nominal (GPS L1 + GLONASS L1 + Beacon)
Reverse Polarity Protection Yes
Communications
Baud Rates 4800 - 38400
Correction I/O Protocol RTCM v2.3 (DGPS), RTCM SC-104, L-Dif
Data I/O Protocol NMEA 0183, NMEA 2000
Serial Ports 1 full-duplex RS232; 1 full-duplex RS422 and 1 half-duplex RS422 (Tx only)
GPS Navigation
Heading Accuracy 0.5°
Heading Fix 10s typical (valid position)
Rate of Turn 90°/s maximum
Receiver Type GNSS L1 Compass
Networking Connectors
Connectors Power/Data Connector: 18-pin, environmentally sealed