吉米JM-6滑雪服压胶机、热风缝口密封机、粘合机、贴条机、焊接机

型号：JM-6
==产品特点==
1.采用PLC易读，高清晰度的轻触式多功能显示屏，对速度、温度、操作编程作出清晰显示。
2.上下压轮同步传动，自动补尝调节虚位，自动徽退功能，减少压带空白。
3.温控表自动控制，操作更简单，稳定性高，温度波动±2°保护发热丝。
4.上压轮气缸采用超薄可调气缸，可对用户加工厚薄布料进行压力调节，防止压坏布料和压出布边有痕迹，解决了同类机器直压到底的缺陷。
5.压轮传动采用步进电机，使之速度稳定，微退稳定，送条准确。大量减少胶带尾部的损耗以及保障产品的质量
6.发热枪供风选用自然高压鼓风机供给发热管之用，避免了常规用高压泵之气源的水分冲击发热内管，使之更加。

==技术参数==
型号 JM-6
电源 AC220V 50Hz
额定功率 2500W
温度控制 无段可调 常温～700℃
速度 1～22m/min 无段变速
压缩空气 0.35～0.5Mpa
压轮宽度 光面25mm标准型，其它如网纹，直纹等可自由选择
可吹胶带宽度 标准型14mm～22mm,其它宽度根据客户自由选择
上压轮升降距离 18mm～25mm
外型尺寸 长1300x宽550x高1650
净重 160kg
缝合跳漏防止: 在热风管与滚轮启动停止与热风管摆动之间均有可供利用调节以防止封口的跳漏
Model: JM-6
Features:
1.Controlled by programmable PLC with HMI soft-touch display,clear display speed,temperature,operation and programming.
2.Synchrodrive of upper and lower rollers,automatic adjust the virtual space and micro-recede to reduce the mistake.
3.Automatic temperature control with high stability and precision can reach ±1℃,temperaure cap setting can protect heating tube.
4.The thin cylinder of upper roller can be adjusted according to your thin & thick fabrics, in order to protect materials and solve the problems of sealing straight of seam kind seam sealing machine.
5.Roller drive controlled by stepper motor,speed and micro-back stability ,accurate in tape-feeding;decrease loss and quality guarantee .
6.High pressure air blower supply the air to heater and quiet. If suddenly power off, it can protect heater and prolong the service life of heater.

Technical parameter:
Model JM-6
Power AC220V 50Hz
Rated power 2500W
Temp control Up to 700℃
Speed 1～22m/min
Air compression 0.35～0.5Mpa
Width of roller Mill finish standard :25mm ,others can be choiced (ie:dictyonitic and ruled surface )
Adhesive tape width 14mm～22mm (standard) others can be choiced
Upper roller lift 18mm～25mm
Size (L×W×H) 1300x550x1650mm
Net weight 160kg
Sealing skip prevention There are adjustable devices to prevent the gun from jumping over the seamed sections when the gun is moving inward with the idle wheel starting,or when the gun moving outward with the idle wheel stopping.