电子产品半导体脱模剂

Properties:
Release Agent in spray tins
The Release Agent is free from silicone !
Suitable for polyester- and epoxy-resins, PMMA, polyurethanes.
For mould construction.
Advantages:
Excellent release
Free of CFC-propellants
Wide range of application
Processing:
Shake well before use.
The Release Agent should be sprayed onto the mould surfaces rapidly from a distance of some
20 to 30 cm. Spraying should be done thin and even.
If the best surface quality is required, the mould can be wiped over afterwards with a soft cloth.
Storage:
Protect from heat and cold. Allow products to reach room temperature before use. Shake well.
Storage temperature: between 10°C and 30°C
Maximum storage: approx. 36 months (originally sealed container)</a></a></a></a>