水泥集水槽模具

此款产品为客户定制水泥集水槽模具，使用全新聚丙烯塑料原料，其中集水槽模具长度为75厘米，宽度为49厘米，深度积水区高度为57厘米，稍浅积水区为58.8厘米，实际高度深浅主要取决于预制水泥集水槽成品，具体详细尺寸可参考下图：
 

除了具备常规集水功能的集水槽模具，在模具两端分别布置直径为30厘米圆开孔，可以添加泄水管道及电缆管道等布置，大大降低了实际集水及预埋泄水管道的施工难易程度，为后期整体项目施工成本的降低打下了坚实的基础。

This product is a custom-made cement sump mold made of brand-new polypropylene plastic raw materials. The length of the sump mold is 75cm, the width is 49cm, the depth of the ponding area is 57cm, and the slightly shallow ponding area is 58.8cm. The actual depth mainly depends on the prefabricated cement sump products. Please refer to the following figure for specific dimensions:

水泥集水槽模具  集水槽模具  水槽模具  集水槽钢模具

In addition to the water collecting tank mould with conventional water collecting function, the holes with a diameter of 30cm are arranged at both ends of the mould respectively, and the arrangement of drain pipes and cable pipes can be added, which greatly reduces the construction difficulty of the actual water collecting and embedded drain pipes, and lays a solid foundation for the reduction of the construction cost of the overall project in the later stage.