电机磁瓦自动点胶机

电机磁瓦点胶机 机器性能(Features)：
1.圆形点胶机是根据圆形产品的尺寸按比例制作出一个相对应的产品模具，由马达带动模具旋转产生涂胶轨迹从而实现圆形产品均匀涂胶；
(based on the size of the product in proportion to produce a mold which is driven by a motor to rotate to dispense uniformly.)
2.可随意设定吐胶前延时间、后延时间、吐胶时间，马达转速，上胶均匀,无接点痕迹；
(arbitrarily setting the delay time before and after glue output, the time of glue outflow, motor speed, dispensing uniformly without traces on contacts.)
3.采用进口气缸，使机器在运行过程中迅捷并保持稳定，避免机械动作误差；
(Imported cylinder enables the machine running fast and stably and avoiding the mechanical action deviation.)
4.配置高性运动控制器，采用液晶屏+按钮方式操作,具备快速编程和实时显示功能,可对点胶角度和反转角度立控制,有效防止胶拉丝现象,操作使用方便；
(Configurating high-performance motion controller, using the mode of button with LCD screen to operate, having fast programming and real-time display features, which enables to control the angle and reverse angle dispensing independently, prevent glue drawing phenomenon effectively and operate easily.)
5.采用精密微步进电机，使点胶过程胶条均匀一致；
(Using precision micro-stepping motor which makes the glue paths uniform.)
6.可依据产品工艺要求弹性加装上下料或其他装置；
(According to requirements of the dispensing process,loading and unloading or other devices can be flexibly installed onto the machine.)
马达磁瓦点胶机 型号(Model) SEC-160RS
吐出量范围
(Discharge volume range) 0.5～30.5ml /shot
吐胶速度(potting speed) 0.3~5 g/sec
混合比例(Mixing ratio) 100:100 ~100: 5
可操作粘度(Operation viscosity) 100~150000CPS
原料桶(Barrel) 2L ~60L SUS304
加胶方式 真空抽取
计量方式(Measuring mode) 容积计量(Volume Measurement)
清洗桶(Cleaning bucket) 3加仑或5加仑（3 Gallon or 5 Gallon）
混合方式
(Blending mode) 静态混合，回转式混合，动态混合
(Static mixing,Rotary mixing,Dynamic mixing)
驱动方式(Drive mode) 气缸驱动，伺服驱动(Cylinder drive,Servo drive)
清洗方式(Cleaning mode) 自动清洗(Automatic cleaning)
控制方式(Control mode) PLC控制(Small PLC control)
气源(Gas source) 0.5~0.7 MPa
电源(Power supply) AC380V 50Hz 2~8KW
外形尺寸(Size) 1250(W)×1400(D)×1650(H)
重量(Weight) 300Kg
详询请咨询东莞市逸协自动化人员或登录逸协官网