BHBY-2S系列齿轮泵、转机供油泵、

BHBY-2S系列 BHBY-2S SERIES
1、用途
适用于输送不含固体颗粒和纤维，无腐蚀性，温度不80℃，粘度为5×10-6～1.5×10-3m2/s(5-1500cSt)的润滑油或性质类似润滑油的其它液体，以及用于液压传动系统。
1, use
Suitable for conveying containing no solid particles and fibers, non-corrosive, temperature is not higher than 80 ℃, the viscosity of 5 x 10-6-1.5 x 10-3 m2 / s (5 to 1500 CST) nature of lubricating oil or other liquids, such as lubricating oil, and used in hydraulic transmission systems.

2、应用范围：
在输油系统中可用作传输、增压泵：
在燃油系统中可作输送、加压、喷射的燃油泵：
在液压系统传动系统中可作供液压动力的液压泵：
在一切工作领域中，均可用作润滑供油泵使用：
2. Application scope:
In the oil transfer system for transmission, booster pump:
In fuel system, the fuel oil pump can be used for conveying, pressurizing and spraying.
Hydraulic power hydraulic pump can be used in hydraulic system transmission system:
In all areas of work, it can be used as lubricating oil pump:
3、齿轮泵结构特点
　3.1 本系列齿轮泵主要有齿轮、轴、泵体、泵盖、轴承套、轴端密封等组成。齿轮采用热处理工艺， 优点是所以齿面无磨损，运转平稳，噪音低、寿命长、。
BHBY-2S系列 BHBY-2S SERIES
3.2密封：泵轴端密封设计为机械密封或填料密封。 　　
3.3轴向：从主轴外伸端向泵看，为顺时针旋转。
3. Features of gear pump structure
3.1 this series of gear pump consists of gear, shaft, pump body, pump cover, bearing sleeve and shaft end seal. The gear adopts heat treatment process, the advantage is that the tooth surface has no wear, smooth operation, low noise, long life, high efficiency.
3.2 seal: the pump shaft end seal is designed for mechanical seal or packing seal.
3.3 axial direction: from the outstretched side of the main shaft to the pump, it is rotated clockwise.
4. 外型部件尺寸图：
4. Dimensions of external parts:



BHBY-2S系列 BHBY-2S SERIES


订货时请注意以下事项：
Please note the following items when ordering:
1、注意所输送液体介质的种类、粘度、温度、易燃、易爆性。
1. Pay attention to the type, viscosity, temperature, flammability and explosive of the liquid medium.
2、介质粘度或低于性能参数规定时，请指出需要的压力流量等参数值，其配套功率和转速等由生产厂计算后确定。
2. When the medium viscosity is higher or lower than the performance parameter, please indicate the parameters such as the pressure flow required, and the matching power and rotational speed are determined by the production plant.


3、轴端密封有特殊要求时请注明详细要求。
3. Please specify the detailed requirements when the axial seal has special requirements.
4、是否配用交流防爆电机、直流电机或船用电机、没注明的出厂时配用交流普通电机。
4. Whether to use ac explosion-proof motor, dc motor or Marine motor, do not specify when the factory is used to communicate ordinary motor.